Select your language
Especially for polishing wheels, flap wheels and brushes by hand.
Lapping Paste Green is also suitable for the sharpening of blades or knives.
Application: The cake is pressed against the rotating disc and softens on the surface due to frictional heat.
This transfers the paste onto the disc surface.
Application overview of all Lapping and Polishing Pastes in Cake Form
Safety Data Sheet (SDS)
Technical Data Sheet (TDS)
Frequently asked questions about Lapping Paste Green
Lapping Paste Green is suitable for metals, plastics and hard resins. It supports deburring and stropping of knife blades with burr free results.
Lapping Paste Green provides fine abrasive action and gentle surface finishing. It creates smooth edges and even gloss without deep scratches.
Wipe residues with a cloth or a brush. Use a mild cleaning agent if needed.
Reduce pressure on soft or thin materials. This prevents scratches or deformation.
Apply Lapping Paste Green evenly onto a leather strop or polishing wheel. Pull the blade across the surface at a constant angle.
Maintain an angle of about 15 to 20 degrees depending on the knife type. Guide the blade evenly without changing the angle.
Use low pressure to achieve a smooth and burr free edge. Excessive pressure reduces the result quality.
Maintain an angle of about 15 to 20 degrees depending on the knife type. Guide the blade evenly without changing the angle.
Use low pressure to achieve a smooth and burr free edge. Excessive pressure reduces the result quality.
